3.03.2012

New Proto!

Been working on a new fuzz, and finally drew up a layout for it on turret board. Got it put together, and tested working great from the start! This is an example of a "dlx" one I guess. They will prob have less options on the finalized ones...or just be custom options.

Controls are loud/volume, tone, gain, and a 4way rotary for various clipping options (germ, zener, 2 sili, led). The +/- footswitch acts sort of like a boost, increasing the gain of the first stage. Layout, controls, graphics, etc are not a representation of the final product. Just something to give a general feel for the couple of guys I have testing these for me.




I actually had to steal the switches for this from other projects in my junk drawer. The enclosure is from a blem pack from Mammoth Electronics. 





12.30.2011

You've been GRISTLEIZED

Had the privileged of building a Gristleizer over the holiday. Was a part of the gift I sent out for this years ILF Secret Santa. I decided to put a twist on the typical design, and built it into a treadle enclosure...a re-purposed crybaby wah for the curious. Here's a little background info on the circuit.


It's hard to explain what all the circuit does, but tremolo/ringmod/broken amp/idk? Tons of control and options. Treadle controls speed, then depth, bias, & volume are on the right. The left has a vca/vcf toggle, and a rotary switch for the waveshape.



Lots of wiring! I ripped the colorful wires from an old computer, woohoo.




12.13.2011

Productivity boost

Here's a great sounding circuit. The pre/boost section of the old echoplex's in stompbox form. Has vol and fat control, & a 17v tap (if you need it). Thinking about building another tailored specifically for bass, though this sounds good with it, I find myself maxing the fat control. 

Pcb came from Madbean


Here's another prototyping breadboard. I'll be selling these soon, so this is the proto of sorts. I also have some stuff I didn't want to tear down on my main breadboard, so needed this.









FUZZZZ

Custom fuzz & another Big Muff. The custom has an oscillation footswitch with control (beam), texture (focus), and volume (target). The big muff has a normal/low gain switch, & two different types of clipping switches for the first and second stages. Also has a feedback stompswitch & mids control. Both pedals sounds fantastic!



I actually put sockets on the normal/low gain switch, so it can be changed to anything really. For instance, you could make both settings higher gain than the original if you wanted.


Both enclosures came from PedalPartsPlus. The turret board is made by me, and the muff pcb came from Madbean.







A new moon


This one has been a bit delayed. You may remember the enclosure I space painted a while back...



I call it Ramrod. Inside is a SuperFET boost (SHO workalike) and a Whisker Biscuit. The WB is similar to the EHX Big Muff but, with much fewer parts. It has socket'd transistors for fine tuning, & sockets for additional tone caps. They can be use independently or cascaded (boost>fuzz).



PCBs came from culturejam, who can be contacted at circuitworkshop.com or forrestwhitesides.com

11.04.2011

Ptp Fuzzrite!




I was sent this photo from the guy I eventually sold the fuzzrite to...

10.09.2011

Turret Boards Are The Tish!

Here are some more point to point builds. I'm running out of turret board! BTW, the layouts I've been using lately are all made by IvIark. They are verified! (If they weren't already).
---------------------------------------
This is a clone of the DAM Meathead. I've never used the real deal, so honestly can't say how they compare, but this one sounds great.



Up next is a clone of the Devi Ever Soda Meiser. I added a momentary switch for the chaos mode! This is the coolest pedal I've made in a while.

Giant knobs from days of yore! If you look closely, you will see 2 resistors in series towards the bottom right. This is what happens when  you don't have the right value on hand; Improvise!


Now, I'll leave you with a preview of the next post...